• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizesOur
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 430
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded construction
• Frame — square tube 40x40 mm
• Natural beech worktop is 40 mm thickness
• Without backsplash
• The table is covered with 100 mm facade panel
• Frame on 3 sides
• Can be completed solid or perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded construction
• Frame — square tube 40x40 mm
• Natural granite worktop is 20 mm thickness
• Without backsplash
• The table is covered with 100 mm facade panel
• Frame on 3 sides
• Can be completed solid or perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
