• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside
• The table is covered with panels around the perimeter
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizesOur
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• One perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• One solid shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• 3D-backsplash is 80 mm height
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The worktop is 50 mm thickness
• The worktop is enforced by wooden board
• There is the metal sheet at the bottom inside the worktop
• The table is covered with panels around the perimeter
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 430
• Welded / demountable construction
• Frame — square tube 40x40 mm
• The backsplash is 40 mm height
• The table is covered with panels around the perimeter for demountable construction
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded / demountable construction
• Frame — square tube 40x40 mm
• Without backsplash
• The table is covered with panels around the perimeter for demountable construction
•The hole with D=200 mm with flange for use with trash can or hole with D=210 mm with rubber ring for packages
• Frame on 3 sides for welded construction
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded construction
• Frame — square tube 40x40 mm
• Natural beech worktop is 40 mm thickness
• Without backsplash
• The table is covered with 100 mm facade panel
• Frame on 3 sides
• Can be completed solid or perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
• Steel AISI 304
• Welded construction
• Frame — square tube 40x40 mm
• Natural granite worktop is 20 mm thickness
• Without backsplash
• The table is covered with 100 mm facade panel
• Frame on 3 sides
• Can be completed solid or perforated shelf
• Adjustable feet
• The height is 850 ... 870 mm
• It is possible to manufacture products with non-standard sizes
From concept and design to manufacturing and installation, Smart Kitchen Co. delivers premium custom stainless steel fabrication for commercial kitchens, hotels, restaurants, cafés, bakeries, hospitals, and food service facilities throughout Kuwait.
